DESIGN FEATURES
1. Bass boost is range from 0-6dB-12dB.
2. Compact sized dimension, high operating efficiency.
3. 7 ways of protection(Thermal, over-voltage, under-voltage,
over-current, over-load, short circuit and direct circuit).
4. 2 Ohms minimum load for full range, 1 Ohm minimum load
for monoblock.
5. Double sided advanced class D.
6. Range from monoblock to 5 channels. 5 channels product
can run a subwoofer and 4 channels speakers, or run 2
subwoofer and 2 channels speakers.
7. Wide range adjustable and selectable LPF/HPF.
8. With remote control, Pre-output, Hi-level switch, Fade switch.
TECHNICAL SPECIFICATIONS
Full Range Class D Amplifier
Stereo output 4Ω @ 14.4V{1%} : 2x350W
Stereo output 2Ω @ 14.4V{1%} : 2x550W
Stereo output 1Ω @ 14.4V{1%} : NA
BTL output 4Ω @ 14.4V{1%} : 1x1100W
Channel Separation (Full Rated Power): >55db
THD Distortion with 22k Filter(4ohm half power): <0.10%
12V Remote Turn On: YES
Soft start Amplifier Remote Turn On: YES
DC Offset Turn On DC Sense on
CH1:12V output on remote terminal
when amp is on: YES
Audible Turn on/off noise: NO
Frequency Response (-3db): 35KHz
S/N Ratio (A-Weight) CEA2006 1W: >80dB
S/N Ratio (A-Weight) Gain minimum: >100dB
Low Level Input (Low/HI Switch): 150mV-5V
Hi Level Input: 300mV-10V
Input Impedance: >20K
Battery Voltage Range for Operating: 9V-16V
LED Indicator: B/R
RCA Jack Output Buffered: YES
Crossover Type: Off-HP-LP/BP
Variable Crossover Range: 50-500 Hz
Switch Crossover Rangge x1-x10: 500-5kHz
Crossover Slope: 12dB
Subsonic Filter Slope: 12dB
Variable Subsonic Filter Frequency: 10-100 Hz
Variable Bass Boost (at 40 Hz): 12dB
Fixed Bass Boost Frequency Q=3: YES
Remote Bass Control: YES
The Current Draw at 2ohms
MAX REMS POWER: 85A
Heatsink Length (mm)-Original: 280mm
GO to protect LED: RED
POWER LED: blue
Individual Channel Clipping
Indicators in Amber (1%THD): AMBER